Product parameters:
Model: OC-H06A
Flow rate: 600L/H
Life: 50000 hours
Voltage: DC12V/24V
Color: Black
Material: aluminum alloy+POM
Rated current: 0.81 ± 5% A
Lift: 5 ± 0.5M
Noise: ≤ 25DB
Sealing performance: ≤ 0.2MPA
Rated power: 9.6W
Note to buyers:
1. When filling the liquid, it is necessary to start the pump power repeatedly for several times. This operation helps to drive the liquid into the loop and expel the air.
2. Do not idle the pump! If there is no liquid, turn off the pump power immediately to avoid damage to the pump.
3. When testing for water leakage, place a paper towel or towel at the joint of the pipe connector to locate the water leakage.
4. After the liquid is added, please open the interface screw above the tank, and let the water cooling loop continue to circulate for 24 hours, so that the gas can effectively discharge from the water cooling system.
About services:
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
